Elcomatic is a hardware repair company which is specialised in EPOS devices at our dedicated facility. Based in Ayrshire, we deal with every big brand such as Micros, Zebra, Epson and Oracle. Our substantial experience allows us to work on equipment in and out of warranty and offer reliable Intermec SR60 service and repair.

With our vast technical knowledge, quick turnarounds, free quotations, and our no fix no fee policy, there is no better option for your EPOS repair demands.

What We Troubleshoot and Repair

At Elcomatic, we possess the working expertise and understanding to operate on the vast majority of electrical apparatus.

To begin with, we specialise in fixing EPOS equipment and all supporting devices. This includes:

• Workstations
• Touch Screen Tills
• Receipt Printers
• Kitchen Equipment
• Mobile Computers

In addition, we are a fully certified and recognised repair facility for all main EPOS providers, such as:

• Micros
• Oracle
• Zebra
• Epson
• Schlumberger
• Motorola
• Hewlett Packard
• Symbol
• IBM

However, we also offer repair solutions for non-EPOS electronic devices like laptops and PCs, arcade machines and gaming consoles , tablets, and mobile phones.

If your SR60 by Intermec has been broken down or has encountered a fault, Elcomatic can quickly get it back in working order and delivered back to your business.

Damaged Intermec SR60

Cracked Screen: It’s not uncommon for glass screens to become broken, especially on the job. For a set charge, we can change the display for a fresh one without delay.

Charging Problem: Whenever your apparatus does not get power, or has a pins/charging issue, our personnel can repair or substitute any problematic components.

Won’t Switch On: When a machine will not turn on, the fix might still be straightforward. By carrying out technical diagnostics on the system, we are able to locate and remedy the source of the issue.

Unresponsive Buttons: Whenever your apparatus has damaged buttons or a malfunctioning touchscreen display, we can identify the source of the problem and fix it.

The Repair Process

Once your R.M.A. (return merchandise authorisation) has been established, you will need to send your faulty Intermec SR60 to our specialist repair facility. Once it reaches us, we will open the box and investigate the device in order to get a sense of what could be wrong with it and book it into our timetable.

The next phase will be to start performing checks to find out accurately what the problem with your SR60 by Intermec is. Provided that the repair method is financially viable, we will then begin substituting or repairing any problematic parts.

We will then start the diagnostic process to identify the failure precisely. If fixing it is possible and worthwhile in terms of cost, we will start the process of making it functional.

Our soak and burn/run in test will guarantee that your malfunctioning Intermec SR60 is comprehensively fixed and is ready for work. This lets us minimise disruption within your workplace as opposed to needing to go through the procedure again.

Last but not least, we will box your equipment adequately before delivering it back to your premises. The device will be ready for work straight out the box, and your enterprise can return to standard service.